The products supplied are defined under the REACH legislative program as articles. None
of the components of our products are intentionally released during the use of our
products when they are used as intended and according to recommended specifications
and parameters. Our products do not contain REACH SVHC materials in excess of 0.1%
w/w as required by the REACH legislation.
[REACH Statement]
Our Factory introduces fastRiseTM Multilayer Non-Reinforced Prepreg
FastRiseTM27 is designed to eliminate skew in differential transmission lines and eliminate
dielectric constant fluctuations caused by fiberglass in filter and coupler applications. This
low temperature thermosetting prepreg is based on ceramic, thermoset and PTFE and is
ideal for use with industry standard low loss laminates like TSM-29.
For applications that require low loss at high frequencies, fastRiseTM27 prepreg offers
design engineers the properties needed for superior performance. The low 0.0017 Df at 40
GHz enables the production of mmWave multilayer PWBs. In addition, the low 420 F (215
ºC) lamination temperature enables sequential laminations to be performed at lower
temperatures than those normally used for FEP and PFA in military constructions.
[more...]
Our Factory base materials are WEEE and RoHS compliant
WEEE (Waste Electrical and Electronic Equipment), a European advisory group, proposed
a directive, which has recently been approved by the European Union (Direction
2002/96/EC), and is concerned with the recycling and recovery of Electrical and Electronic
waste. This is translated into the RoHS (Restriction of Hazardous Substances) directive in
each individual country and is complimentary to the WEEE.
We can confirm that all products listed in the our factory WEEE and RoHS Compliance
Statement are in compliance with those directives.
of the components of our products are intentionally released during the use of our
products when they are used as intended and according to recommended specifications
and parameters. Our products do not contain REACH SVHC materials in excess of 0.1%
w/w as required by the REACH legislation.
[REACH Statement]
Our Factory introduces fastRiseTM Multilayer Non-Reinforced Prepreg
FastRiseTM27 is designed to eliminate skew in differential transmission lines and eliminate
dielectric constant fluctuations caused by fiberglass in filter and coupler applications. This
low temperature thermosetting prepreg is based on ceramic, thermoset and PTFE and is
ideal for use with industry standard low loss laminates like TSM-29.
For applications that require low loss at high frequencies, fastRiseTM27 prepreg offers
design engineers the properties needed for superior performance. The low 0.0017 Df at 40
GHz enables the production of mmWave multilayer PWBs. In addition, the low 420 F (215
ºC) lamination temperature enables sequential laminations to be performed at lower
temperatures than those normally used for FEP and PFA in military constructions.
[more...]
Our Factory base materials are WEEE and RoHS compliant
WEEE (Waste Electrical and Electronic Equipment), a European advisory group, proposed
a directive, which has recently been approved by the European Union (Direction
2002/96/EC), and is concerned with the recycling and recovery of Electrical and Electronic
waste. This is translated into the RoHS (Restriction of Hazardous Substances) directive in
each individual country and is complimentary to the WEEE.
We can confirm that all products listed in the our factory WEEE and RoHS Compliance
Statement are in compliance with those directives.
 |  |  |  |  |
| |||||||